Network Cable Installer

K1

Principles associated with the transmission of digital information over copper cable networks. The impact incorrect work has on the communication link. Ohms Law and the changes in the electrical characteristics of copper cable caused through handling and installation irregularities.

K2

Principles associated with the transmission of digital information over fibre cable networks and the impact that your workmanship has on the communication link. Understands the principles of light propagation and has a fundamental knowledge of attenuation within the fibre channel.

K3

Components of a structured cabling infrastructure and the relationship between campus, building and floor distributors, with relevance to the cable installation plan. Fundamental elements of IT network architecture, including the range of cable types and networking equipment including routers and switches.

K4

Electricity at work act. How work carried out during network cable installation tasks are governed by supporting standards for example BS7671.

K5

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K6

Design specifications, calculate time factors and documentation including floor plans, patch lists, bills of materials, rack face and layout plans. Ensure necessary tools and quantity of equipment required for tasks.

K7

Principles associated with the transmission of digital information over copper cable networks. The impact incorrect work has on the communication link. Ohms Law and the changes in the electrical characteristics of copper cable caused through handling and installation irregularities.

K8

Principles associated with the transmission of digital information over fibre cable networks and the impact that your workmanship has on the communication link. Understands the principles of light propagation and has a fundamental knowledge of attenuation within the fibre channel.

K9

Requirements to comply with national and international standards for example British standards institute BSEN 50173-series, BSEN 50174-series, BS 7671, and BS6701. The importance of following manufacturers' best-practice guidelines.

K10

Electricity at work act. How work carried out during network cable installation tasks are governed by supporting standards for example BS7671.

K11

Structural components of equipment racks and or cabinets. How to assemble them to meet the requirements on the infrastructure design.

K12

Test parameters for copper and fibre cable certification in accordance with industry standards such as BSEN 50346- information technology-testing of installed cables, the routine for test equipment service and calibration.

K13

Criteria that network components will be inspected against. The impact of failing to meet required quality standards.

K14

Effects of emerging technologies on media selection, installation practices and additional testing requirements.

K15

Maintain accurate documentation and the efficient use of resources. The depth of information and sustainability required for successful completion and handover to the customer.

K16

Principles associated with the transmission of digital information over copper cable networks. The impact incorrect work has on the communication link. Ohms Law and the changes in the electrical characteristics of copper cable caused through handling and installation irregularities.

K17

Health and Safety at work legislation whilst working in the network cable installation sector.

K18

Health and safety risk associated with carrying out cable installation, who might be affected, and what actions can be taken to mitigate the risk.

K19

The structures and roles of personnel involved in the project, who they need to communicate with and for what reasons.

K20

Asbestos Containing Materials ACMs. Actions to be taken and dangers associated with, if ACMs are identified whist installation work is being carried out.

K21

Electricity at work act. How work carried out during network cable installation tasks are governed by supporting standards for example BS7671.

K22

Legislative requirements under the working at height regulations, including personal competence and inspection regimes and the safe use of mobile access towers.

K23

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K24

Principles involved in the maintenance of cyber security, such as workplace processes implemented by the organisation for the protection of data.

K25

Design specifications, calculate time factors and documentation including floor plans, patch lists, bills of materials, rack face and layout plans. Ensure necessary tools and quantity of equipment required for tasks.

K26

Health and Safety at work legislation whilst working in the network cable installation sector.

K27

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K28

Design specifications, calculate time factors and documentation including floor plans, patch lists, bills of materials, rack face and layout plans. Ensure necessary tools and quantity of equipment required for tasks.

K29

Health and Safety at work legislation whilst working in the network cable installation sector.

K30

Health and safety risk associated with carrying out cable installation, who might be affected, and what actions can be taken to mitigate the risk.

K31

Asbestos Containing Materials ACMs. Actions to be taken and dangers associated with, if ACMs are identified whist installation work is being carried out.

K32

Electricity at work act. How work carried out during network cable installation tasks are governed by supporting standards for example BS7671.

K33

Legislative requirements under the working at height regulations, including personal competence and inspection regimes and the safe use of mobile access towers.

K34

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K35

Design specifications, calculate time factors and documentation including floor plans, patch lists, bills of materials, rack face and layout plans. Ensure necessary tools and quantity of equipment required for tasks.

K36

Workforce management systems and the workflow functionality.

K37

Health and Safety at work legislation whilst working in the network cable installation sector.

K38

Health and safety risk associated with carrying out cable installation, who might be affected, and what actions can be taken to mitigate the risk.

K39

Asbestos Containing Materials ACMs. Actions to be taken and dangers associated with, if ACMs are identified whist installation work is being carried out.

K40

Electricity at work act. How work carried out during network cable installation tasks are governed by supporting standards for example BS7671.

K41

Legislative requirements under the working at height regulations, including personal competence and inspection regimes and the safe use of mobile access towers.

K42

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K43

Requirements of the new roads and streetworks act and associated codes of practice. When legislation applies, and the levels of authorisation required to perform works.

K44

Principles involved in the maintenance of cyber security, such as workplace processes implemented by the organisation for the protection of data.

K45

Requirement for the segregation of data cables from electrical cables in accordance with BSEN 50174. Media that supports other data services for example, telephone, security, alarms and AV systems. The precautions to be taken to prevent interference or damage to the systems.

K46

Principles involved in the maintenance of cyber security, such as workplace processes implemented by the organisation for the protection of data.

K47

The structures and roles of personnel involved in the project, who they need to communicate with and for what reasons.

K48

Maintain accurate documentation and the efficient use of resources. The depth of information and sustainability required for successful completion and handover to the customer.

K49

Workforce management systems and the workflow functionality.

S1

Install copper cabling components for Local Area Networking (LAN). Carry out maintenance tasks on copper cable networks. Identify, locate and repair common faults.

S2

Install fibre optic cabling components for Local Area Networking LAN and Wide Area Network WAN infrastructure. Identify, locate and repair common faults.

S3

Apply health and safety working practices to keep themselves and others safe.

S4

Assess the requirements for cable containment by type and size to build a pathway suitable for routing data cables. Install containment systems, using tools and methods for cutting, shaping and mounting tray, basket trunking and conduit.

S5

Analyse plans, make decisions about equipment types and quantity, and predict time frames.

S6

Interpret the customer statement of requirements to determine the quantity and quality of components to be used in the cable network.

S7

Carry out testing of fibre optic cabling using an optical loss test set, Tier 1 and fibre inspection tool in accordance with equipment manufacturer’s procedures, and compliant to industry standards.

S8

Prepare, constructs and installs telecommunications equipment cabinets, either pre-built or from flat-pack. Arrange and install fixtures and fittings for the intended use. Selects network equipment components for installation into cabinets, differentiating between switches and routers.

S9

Conduct testing on copper cabling in accordance with equipment manufacturer's procedures, compliant to industry standards, interpret results and rectify failures.

S10

Carry out testing of fibre optic cabling using an optical loss test set, Tier 1 and fibre inspection tool in accordance with equipment manufacturer’s procedures, and compliant to industry standards.

S11

Analyse copper and fibre test results and provides certification to the customer.

S12

Interpret the customer statement of requirements to determine the quantity and quality of components to be used in the cable network.

S13

Communicate with key stakeholders in the customer's organisation including the customer, the construction design and management CDM co-ordinator, the project manager and the information technology IT security officer.

S14

Work at height in a safe manner.

S15

Work in confined spaces by implementing health and safety procedures, using and maintaining personal protective equipment.

S16

Install end-point equipment using fixings and media.

S17

Carry out testing of fibre optic cabling using an optical loss test set, Tier 1 and fibre inspection tool in accordance with equipment manufacturer’s procedures, and compliant to industry standards.

S18

Work at height in a safe manner.

S19

Install end-point equipment using fixings and media.

S20

Assess the requirements for cable containment by type and size to build a pathway suitable for routing data cables. Install containment systems, using tools and methods for cutting, shaping and mounting tray, basket trunking and conduit.

S21

Install end-point equipment using fixings and media.

S22

Assess the requirements for cable containment by type and size to build a pathway suitable for routing data cables. Install containment systems, using tools and methods for cutting, shaping and mounting tray, basket trunking and conduit.

S23

Quantify equipment requirements and timelines for tasks to be carried out.

S24

Work at height in a safe manner.

S25

Work in confined spaces by implementing health and safety procedures, using and maintaining personal protective equipment.

S26

Apply health and safety working practices to keep themselves and others safe.

S27

Maintain cyber security, applying processes and procedures aimed at protecting data confidentiality.

S28

Maintain cyber security, applying processes and procedures aimed at protecting data confidentiality.

S29

Interpret the customer statement of requirements to determine the quantity and quality of components to be used in the cable network.

S30

Quantify equipment requirements and timelines for tasks to be carried out.

S31

Communicate with key stakeholders in the customer's organisation including the customer, the construction design and management CDM co-ordinator, the project manager and the information technology IT security officer.

B1

Works professionally, taking initiative and acting with an ethical approach.

B2

Prioritise the safety of self and others.

B3

Prioritise the safety of self and others.

B4

Prioritise the safety of self and others.

B5

Works professionally, taking initiative and acting with an ethical approach.

B6

Self-motivated and able to work alone or as part of a team. The ability to work with colleagues whilst contributing to a supportive and inclusive, diverse workplace, respectful of different views.

B7

Prioritise the safety of self and others.

B8

Be organised and apply effective time management to meet deadlines.

B9

Works professionally, taking initiative and acting with an ethical approach.

B10

Prioritise the safety of self and others.